How To Change The Stain Hardwood Floors

The usual procedure is to sand the bulk of the floor with a drum sander and sand the.

How to change the stain hardwood floors.

After applying each stain portion wipe off the excess with a clean rag. Try to work in the direction of a wood grain. Application can be done with a brush rag or roller. Clean the floor of any dust or debris.

Simply give it a light sanding with fine grit sandpaper remove sanding dust and brush on a coat of polyshades see step by step instructions provided in this guide. Paint along the grain for best results. Otherwise the drying time will be increased heavily. Get your kneepads on because you don t want to get stain solution on your clothes or bare skin.

Sand the surface of your floors with sandpaper. Using a brush or roller apply a thin first coat of paint. To lighten the color of the floor you must sand off the existing finish and stain with floor sanding equipment. There are different techniques of stain application but principals are the same.

Minwax polyshades is an easy way to change the color of your currently stained or polyurethane finished wood. Staining the hardwood floors that were just sanded sanding 50 year old hardwood floors https youtu be gsowp0ik0sshey everyone my name is calvin and my wif. Carefully vacuum up dust and grit from the sanding process and then wipe down the floor with a tack cloth to pick up any remaining dust. Apply stain on the surface of the wood.

The less boards you stain the faster you can move. Start brushing the stain into the edge of the floor along the back wall about a metre to a metre and a half from the corner out then down the other wall along the ends of the boards pictured below. Let it penetrate for a few minutes and swipe everything what is left from the surface.