Clean the grout by scrubbing it with a scrub brush saturated in a solution of equal parts bleach and water.
How to clean and restore old floor tiles.
To clean tile flooring start by mopping the tiles with diluted white vinegar.
Allow the grout to dry for 15 minutes.
When you re finished rinse the floor with clean water to get rid of any vinegar residue.
Today i am going to show you the most effective way i have found to clean dirty textured tile flooring that has been neglected.
With a damp cloth thoroughly clean the bed and back of tile.
Use a bristle brush or vacuum cleaner to remove dirt and grit beneath the loose tile.
Remove some of the old bedding evenly and apply tile adhesive to back of tile.
Spread the grout over the joint lines surrounding the tile holding the float at a 45 degree angle to the surface.
Follow the product instructions to apply your chosen cleaning product working on each tile individually.
Wipe off the grout haze on the surrounding.
When we moved into our fixer upper it had been vacant for some time.
Leave the cleaned flooring for twenty minutes and then rinse away the product.
Simply mist water and white vinegar in a spray bottle and spray the mixture lightly in the floor.
Then use paper towels to dry the tiles.
Unfortunately the rooms in this building were previously used as a sort of dumping ground for builders working on the property covering the floor with cement plaster sealant and glue while also inflicting significant.
If there are any stains left on the floor scrub them using equal parts scouring powder and warm water.
A soft plastic scourer that can work on the embedded grime without scratching the tile is recommended.
The bleach will brighten the grout and remove any mold or mildew that may be growing on it.
As one of the few surviving of its kind this old flagstone floor has a preservation order on it this means that it can t be covered by wood or other tiles.
If the bedding has crumbled you will need to re bed the tile in adhesive.