How To Install Deck Railings And Balusters

Place baluster section set some 2x4 scraps on the deck to temporarily hold the baluster section up so its top is flush with the tops of the posts.

How to install deck railings and balusters.

To build a deck railing start by figuring out how many posts you need then cut your wood to size and install the posts. Rip a piece of plywood or 1 x 4 or 1 x 6 lumber to match the desired space between rails. Be sure to screw in the baluster connectors into the center of the 2x4 rail. Slip the baluster section into place and clamp it.

In either case drill pilot holes according to the marks on the deck floor. While they do vary by region building codes usually require deck railing to be anywhere between 36 to 42 inches. Installing stair balusters step 1 lay each stair rail in the position that you will be installing them on top of the stair treads and flush against the stair posts. Attaching the aluminum balusters.

Deck balusters should be installed less than 4 on center. Generally any deck raised 30 inches above grade is required by code to have a railing. Using those posts as a guide mark the rails to indicate the proper angle and then cut the rails. In this article we will show you what materials and tool you need and will help you with a lot of useful tips as to build simple and cheap wood railings for your deck balcony or terrace.

Next mark the railing height on the posts with a pencil and double check the distance between the posts. Install your bottom rail 1 1 2 above the deck floor if you are using a 2x4 or 2x6 rail cap with 26 balusters to assemble a 36 high guardrail. Press the baluster against the spacer and the neighboring baluster or post as you drive the fasteners. This article is about how to install balcony railings and balusters this is a diy step by step guide for all do it yourselfers who want to learn how to install railings and balusters.

Attaching balusters will proceed much more quickly if you make a spacer. Step 5 mount uprights to deck floor position your metal post and use a bar level to be sure the post is vertical. Measuring posts and balusters most building codes require railings to be between 36 and 42 inches high carefully considering the height length and width of your deck railing choice is important because your local building codes will require certain dimensions and spacing. The posts and balusters of your metal deck railing will include a flange that attaches to the floor or a separate base that mounts to the floor.

Make the spacer long enough to span from the top to the bottom rail. Attach the balusters to the rails with one screw or nail driven into each joint.