1000 series is a residential door closer that is non handed size 1 only fits doors 24 and 30 wide weighing 30 to 65 pounds.
How to install tell residential door closer.
The hole closest to the end of the bracket is the winter hole.
Align the holes on the arm of the cylinder underneath the holes furthest away on the bracket.
Place the door bracket over the hole on the end of the cylinder.
Now put your hand a foot from the hinge side of the door and push it closed.
Non handed size 3 only fits doors 34 to 38 wide weighing 85 to 120 pounds.
The cnc room in my workshop was getting too much dust because of the wood working.
Tell manufacturing inc.
Close the storm door and latch it.
Open the door 1 inch 2 5 cm if the closer is under too much tension to slide the pin out.
1000 2000 series residential door closers non handed 1000 is size 1 only 2000 is size 3 oly.
Insert the length of the door closer pins through the door bracket winter hole and closer cylinder hole.
If you want to mount on the push side look for a closer with a parallel arm mounting option.
Rotate the sweep adjuster to slow the closing speed to about five seconds it will prevent the door from bumping you in the rear as you exit.
Standard closers are designed to be mounted on the pull side of the door where you pull the door toward you to open it.
Hydraulic door installation and hydraulic door closer adjustment.
To see what this means go to a door with no door closer.
How to install door closer standard installation video by tell manufacturing inc.
Watch this video to find out more.
Adjust the tension screw on the pneumatic cylinder to regulate the closing speed.
Attach the other half of the closing arm to the door.
You can mount your closer on either side of the door but you must select a unit that is designed for that type of mounting.
Hope this helps in s.
So i installed this door closer to keep the dust off.
Link the two halves of the closing arms together.
2 put the pin in the hole furthest away from the cylinder to make the door latch.