Slide the door open and shut to move the lubricant around the track making sliding easier.
How to make your sliding screen door slide easier.
If you see any clear the debris and wash the tracks with warm soapy water.
How to instructions for fixing a sticking sliding screen door.
So as a first step most sliding doors have a mechanism called an adjusting screw located at the bottom of the door ends.
Slide the door along the track to see if it is aligned correctly.
Rub a thin layer of dry lubricant to the track.
If your sliding patio door is hard to slide while opening and closing the rollers may need be to adjusted open the door slightly and look at the reveal or g.
Make sure top gap of door is about the same as bottom and tighten those screws only.
Be sure to check between the screen door and the glass.
First check your sliding door tracks for any debris or dried liquid.
Some doors use a little screw to.
You can also carefully spread petroleum jelly along the track with your finger or a small brush and then move the door back and forth to distribute it along the entire length of the track.
Turn this screw to raise or lower the roller on that end.
The bottom screw is the screw that holds the roller body in place.
Do not use oily lubricants on the track as this can make.
The adjustment screw is usually above that screw.
Close the door again and see if you notice a gap between the edge and the frame.
Also make sure the door lines up with the strike plate on the door frame so you are able to lock it without a problem.
If you re confident that there s nothing else blocking the sliding patio door track then it s time to lubricate.
This one you don t want to touch.
Give the screw a.
Now go to back end and do the same with the gap and tighten those screws.