How To Put Up A Wood Picket Fence

If the soil is hard cut through the sod with a shovel and or let water soak into the dirt.

How to put up a wood picket fence.

A picket fence generally has a 2 gap between the pickets. How to build a picket fence. Begin by installing the pickets on the exterior side of the fence. You will have to level every picket on a picket fence.

Fasten the first panel to the posts and the wood backing with galvanized nails and a hammer or nail gun. Use a post hole digger to dig a straight walled hole. The pickets will be installed on the neighbor public side of the fence leaving the good side out. If you plan to anchor the post in gravel dig a bit wider roughly 8 inches 20cm across for a standard 4x4 post.

Tie a line of twine between these two posts to establish a straight guide line. Use the 2 by 4 method above to position it at the correct height. The pickets will be set side by side butted tight together to avoid any gaps. Remember to leave room to build a wooden gate if you want an entrance and exit point.

At each change in grade temporarily nail one picket. Secure the picket with a pneumatic nailer pneumatic stapler or drill driving two fasteners at each rail. Using a jig for spacing space your next picket 2 away. Drive in one stake to mark the.

Much like solid fence install your first picket against the house or at the end of the rails. Continue doing this until all panels have been installed. Starting at a corner line up the first picket on the rails keeping it flush with the rail ends. Hammer a pair of stakes into the ground marking the end posts of the picket fence.

Corner fence posts fence fence pickets holes for the fence posts installing the fence on your own instructions to put up a wood picket fence keeping the same distance between the fence pickets line fence posts putting up a wood picket fence wood picket fence wooden stakes and string for marking the fence location.