How To Remove Pool Light Niche

3 there should be sufficient slack on the fixture cord to bring it to the surface and place it on the deck for servicing.

How to remove pool light niche.

As you can see in the video a leak had been attempted by another company prior to the customer calling us at first glance it l. Then remove the screw at the top of the lighting fixture and use a flat head screwdriver to pry the fixture out of the niche box. Failure to do so could result in death or serious injury to serviceman. If the niche springs out you may need a helper to try and move the niche while you screw in the light ring.

This series of product cross reference charts is intended to help you find the closest suggested hayward replacement for other manufacturers equipment. Be careful with old soft brass screws. Large plastic niche installation guide 5. This is probably the most common repair in swimming pool lights.

Make a cone of putty that seals up against the niche cord and port. Remove the plastic bag containing the cord seal assembly seal and stub from the inside of the niche. Always disconnect the power to the pool light at the circuit breaker before servicing the light. Recommended replacement product may not be an exact feature match they may include enhancements.

Next unscrew or pry the cover and lens off the fixture and replace the old bulb with a new identical one. First you need to pull the lamp out of the niche and then remove the clamp band. You might have to get some long temporary screws to get the niche in place then swap them out with the stainless ones. To change a pool light start by shutting off all power to the pool using your home s circuit breaker.

Please review the product literature or talk to your pool professional. Mix up half of the epoxy resin pool putty and pack it around the cleaned up light cord and connection port. This one was a little tricky. Use spray lubricant first and use the proper size screwdriver to make sure you don t strip the head or even break off the screw head.