The two inches of space between the curtain and floor prevents the bottom of the curtain from collecting too much moisture and dirt.
How should my bath shower curtain hang from the floor.
Tension rods are easy to install and don t require any tools or hardware.
To effectively contain moisture the curtain needs to hang at least 5 inches below the edge of the bathtub.
In general you ll want to hang the shower curtain so that the bottom hem is at least 1 to 2 inches from the bathroom floor.
Make certain that the liner sits inside the shower curtain with the shower curtain pattern facing out.
These rods can be twisted into place and easily adjusted.
Overly long curtains provide the ideal environment for.
How to hang a shower curtain rod.
Minimum overlap in a tub is generally 3 inches 7 6 cm since tubs are curved and the shower curtain liner usually cannot hang straight down a little extra overlap length is needed.
Separate the liner from the.
Maximum overlap should still leave the liner about 5 inches 1 3 cm from the floor so that it will not be stepped on.
My preference is to line it up with either the outside edge or center of the tub so any decorative curtain outside the shower hangs nicely.
Mounting rods rely on.
4 place the rings onto the curtain rod and snap them shut.
There are basically 2 types of shower rods.
There should be 2 inches of space between the floor and the shower curtain.
Hanging a shower curtain higher on the wall gives the illusion of a higher ceiling in the bathroom while hanging the curtain lower can help hide an older tub or unsightly tiles.
The curtain shouldn t hang too far into the tub or mold will develop on.
A standard shower curtain is typically 72 inches long so the curtain rod should be installed around 75 to 77 inches from the floor.
The shower curtain should hang at least six inches below the edge of the tub to prevent water from spraying onto the floor.