How To Change Halogen Bulb In Floor Lamp

Pull the halogen bulb straight out if it doesn t require twisting.

How to change halogen bulb in floor lamp.

Screw in the replacement bulb clockwise until it is firmly in place. How to replace a cooker hood halogen bulb or lamp duration. Use the screwdriver to do the same thing on the other side. While doing this slowly turn the bulb counterclockwise and gently pull it out.

If its a halogen bulb light most floor lamps then shut the lights off on the fan undo the cover over the bulb the bulb should be a push in and insert tube bulb. Take out a flathead screwdriver and tap on the gap on one of the sides. You ll hear a snapping sound that will indicate that the bulb is connected. Align connection pins with the connection socket and press bulb down into the connection socket.

However halogen lamps create far more heat than older type bulbs and for that reason you must take care where you place these lamps and keep flammable materials away from them. Plug in the lamp and turn it on to make sure that the bulb works. Force the second side out and snap it out. Test the bulb s in known a working lamp to determine if they are good.

The oils from the skin that would be left on the lamp will result in early lamp failure. Lightly push the bulb inward with your gloves on and the ladder steadily in place grip the bulb and lightly push it inward. The oils on your hands will rub onto the bulb and cause it to have hot spots and burn out faster. The prongs will come loose from the notches and the bulb will be completely removed.

Simple video demonstrating step by step process in changing a halogen bulb. Halogen light bulbs or lamps as they are called give off a brighter light than the older incandescent bulbs. Use the screwdriver to press on the spring load and slowly pull out the first side of the bulb. Replace the glass cover over the top and screw it in place.

Also remember not to touch the new bulb with your bare hands. Simply grasp the bulb using your covered fingers or a tool and pull directly outwards. Smaller types of halogen light bulbs like a g9 or g4 don t require twisting to remove them. Use a cloth or wear gloves when handling the bulb to avoid contact with skin.

Never handle the glass of the lamp with bare hands. If unable to test by swapping assume the lamp is good. It is advised to keep a couple of extra halogen bulbs on hand as well.