How To Clean An Asbestos Tile Floor

Workers should spray the flooring and any old adhesive underneath to keep it damp at all times.

How to clean an asbestos tile floor.

Place an asbestos grade piece of plastic liner along the floor to catch dust falling from your cleaning effort unless you are removing asbestos tile from the floor. Use two coats of multi clean stainless. Fill a bucket with water and clean your trowel when you are applying the leveler. Use a wet vacuum preferably one equipped with a hepa filtration system to thoroughly clean the floor and remove the old wax and finish.

Rather it leaves behind a stronger protective film on the floor. Run a piece of tape along the top of the plastic along the wall to prevent dust from falling through. If you can apply two or three layers of a good sealer to the tiles before you apply your finishing coat. A solvent may be useful for dissolving old adhesive.

Keeping asbestos materials wet helps prevent dust from getting into the air. Step 5 use the trowel to smooth the compound onto the floor tiles. Dispose of asbestos floor tiles in approved asbestos disposal bags and seal each one as directed. Tape the plastic film so that it comes up the wall several inches.

This type of seal is not designed to be stripped like normal floor sealers. Pour the embossing compound onto the asbestos floor. Any chemical that is used on the floor should be tested on a small out of the way patch of flooring first. When cleaning is complete discard mop heads and rags used to clean asbestos along with the rest of your asbestos contaminated materials.

Thoroughly rinse the floor after all existing finish is removed. But typically you can make a fairly accurate guess if your building is older than 1980 especially between the years 1920 1960 that has the original floor and your tiles are 9 x9 or 12 x12 1960 s onward. Finishing your asbestos floor tile applying a sealer. Never use oil or solvents such as naphtha gasoline turpentine or carbon tetrachloride for cleaning asphalt tile.

Wet cleaning asbestos involves mopping the floors and using damp rags to wipe down floors and other surfaces that have been contaminated with asbestos. Never use a solvent or paste wax which can harm the tile. Wet wipes or a hepa vacuum. Clean up any remaining bits.

If necessary repeat this operation until all the existing finish is removed. What are asbestos tiles. Use a steel floor scraper to pry up the asbestos tiles one at a time. Multi clean products used for maintaining asbestos flooring sealers.