Repeat the scotch brite sponge warm water goo gone and putty knife process until you have the floor as good as you can get it.
How to clean hardwood floors without sanding.
Before using vinegar to remove dirt from your old damaged floor ensure that you sweep the floor clean.
Work toward the exit so you won t step onto the polish after it has been applied.
Toss the microfiber pad and applicator into the washing machine to clean.
You may otherwise be on a budget and just want to spruce up your floor.
Saturate a sponge mop with the cleaner wring out the excess liquid until the mop head is damp but not dripping then mop three foot sections of the floor at a time using circular motions to draw.
Wait for it to dry and then sweep and mop the hardwood floor.
Use a finish compatible with the existing finish.
Clean an unsound finish with mineral spirits.
Mix vinegar and warm water by adding half a cup of white vinegar to half a bucket of warm water and stir.
The solution of water and vinegar cuts through debris dirt and grime leaving a streak free clean floor.
There are two basic methods.
You want it to be as clean as possible when you apply the reviver.
To refinish a floor without sanding you need a floor that s already in quite a good condition.
Sweep or vacuum then mop with a commercial wood floor cleaner or solution of a quarter cup of dish soap and a gallon of warm water to lift any lingering grime.
Thoroughly clean the floor with a ph neutral cleaner and lightly rub it down to provide a key for the next coat.
If your hardwood floor is only lightly worn damaged or scratched you may be able to refinish it without sanding.
It s best to clean a floor with an unsound finish with odorless mineral spirits.
Remove everything from the room and sweep or vacuum the hardwood floor to remove any dirt or debris.
Dampen a terry cloth towel and wipe down the hardwood surface.
Give the floors a final pass with a.
Open all windows and doors.
Use a scouring pad or sanding screen to deal with tougher spots.