How To Install Chain Link Fence Slats

The slat must slide into the column of open links which are formed by the chain link mesh.

How to install chain link fence slats.

To install a chain link fence start by establishing your property lines and placing your post holes 4 inches inside those lines. Fence slat installation instructions fence slat install instructions 3000 series 4000 series 5000 series 6000 series. You can insert each strip straight down by pushing the top end through a hole at the top and the bottom end through a hole at the bottom or you can weave the strips through more holes in the fence. Next measure the total length of the fence and mark where each terminal post will go.

Step 4 stretch chain link fence. Posts come in two diameters. At the top insert slats vertically with tapered end facing down. Sliding the slat into the column slide down the vinyl slat from the top of the chain link fence such that locking notch remains at the top of the fence.

The wider diameter 2 3 8 inches is for corner and end posts. Then the slat will automatically slide into the column. Row of fence links. You ll want to dig your terminal posts first and then install your line posts.

If you choose to arrange the slats diagonally cut additional slats to fit gaps where necessary. Lite link ez slat m shaped. An important step knowing how to build a chain link fence is digging the post holes correctly. Most bags of fence slats will have 78 82 slats depending on the style per bag to cover 10 feet of fence.

Lay out the chain link fence on the ground near where the posts are. Slide the bands onto the posts and then install the end caps. Chain link fences offer a low cost means to fence in a yard but unlike other fencing alternatives they offer nothing in the way of privacy. Below are close up pictures of each slat showing how to install.

Use a rubber mallet to drive the caps onto the posts. Fence slats are inserted vertically down through the chain link fence. Before you start to place the chain link fence on the posts it will need to have the tension bands slid onto them. The mesh size which is the size of the diamond shaped open spaces between wires can vary but home fences usually are 2 to 2 3 8 inch mesh.

Push slat through links until it clicks into the locking channel.