How To Paint A Deck With A Roller

On all but the most compact decks the best tool for the job is a paint roller.

How to paint a deck with a roller.

It is better to apply several thin coats than one thick coat. After that two or three dips are all you need. Apply paint with a paint roller to the area. The paint application should be thin.

But as a first timer you mightn t find it easy to sand a deck with a roller. Work from corner to corner rolling the paint on to meet the corners or edges you have cut with the paintbrush. Roll back and forth at a smooth steady pace refilling the roller as frequently as needed. Always work with the grain for the most even distribution of color.

You have a choice of non skid additives or paints that already contain nonskid compound. But among all the situations you might face and choices you ll need to make there are some deck painting truths that to paraphrase mr. You must know using a roller is one of the easiest options for sanding your deck. It s all about surface preparation.

Jefferson we hold to be universal. Leave the roller almost dripping with paint. Apply the paint to the damp deck with a roller that has a nap no deeper than 3 8 inch. Yes keep a paintbrush within reach and use it to work paint between boards and to cut in around posts.

With a pad you pull and push the pad back and forth. When the pad begins to leave streaks refill with stain. And then rolling it against the screen. Filling a dry roller cover with paint will require five or six repetitions.

Here s why we have come with the simple guidelines about how to stain a deck with a roller. Given that decking has space between each board you re likely to lose a significant amount of stain through the cracks. Mix the systex or other similar deck paint thoroughly. Then there s the choice of roller brush or roller and brush.

Load the paint roller cover with paint by dipping into the paint about 1 2 in. Apply a small amount of paint at a time as you do not want the paint to clump or dry too thick.