How To Put Pella Screen Door Back On Track

Step 4 lift the sliding glass door up and set the bottom edge of it into the bottom track.

How to put pella screen door back on track.

Or the track may be bent. Here s a quick video on how we removed and installed sliding pella screen doors hopefully this helps you guys out pellascreendoors. If you look at the bottom track you should a couple of half moon shaped cutouts. Turn each screw counterclockwise to raise the wheels and lower the door so that you can lift the door up and out of the track.

I d start in reverse order cleaning the rack first and replacing the wheels last. I am assuming you have a pella screen door with the screen door on the inside. Spray the tracks with an all purpose cleanser and wipe gently with a cloth or paper towel. Push on the door as you loosen the screw.

Try these 4 ways to get sliding door back on track mike mcclintock special to tribune newspapers when glass sliding doors bog down in their tracks and need to be tugged open and closed there are. I have five brand new windows put in. Release the wheel when it s over the track. Raise the wheel by turning the adjustment screw counterclockwise.

Once the tracks are clean and free of dust and hair you are ready to put the sliding glass door back in place. Turn the screw located at the bottom of the door s latch face counterclockwise with an 8 inch 2 phillips screwdriver. First locate the adjustment screws along the bottom of the outside face of the door frame shown or on the door s inside edge. Lift each of the wheels with a flat head screwdriver while you push the door in.

It can be fixed by bending it back with pliers. Loosen the screws as you have done and line up the rollers right above the half moon shaped cutouts then pull the bottom of the door toward you. With the door set aside vacuum up any debris and wipe the track. Lower the door when both wheels are on the track.

Or maybe the track just needs cleaning and a spray of wd 40.