You have to sand a 2 area all around the hole.
How to repair small holes in vinyl fence.
Fill the space slowly to allow the foam to expand.
As you probably also know by now if you have tried any of them tha.
Once it is dry sand the filler until it is flush with the surface of the fence.
For best results cut a bevel along the edge of the vinyl.
The only diy vinyl fence repair that actually does work the photo above there are many articles out there and youtube video s showing the best methods for repairing vinyl fence.
Fill the dent hole with the plastic body filler and let it dry as directed.
Take a damp towel and clean the fence from any dirt and debris.
Clear away all the dust and debris.
Sand the area around the damage after you have removed the rough edges around the inside of the damaged area the next step is to use 200 grit sandpaper to smooth the repair site.
Trim jagged edges or excess vinyl from around the hole with a utility knife.
Spray the foam into the hole and fill as much of the vinyl fence as you can.
Thank you for your help.
Slide the rail into the holes on the fence posts.
Take a look at the hole in the vinyl fence.
Attempt to remove any.
The fence is 4 feet high and has 2 horizontal members per section.
See if you ll need an expanding insulation foam.
Diy vinyl fence repair.
This will help you create a much smoother transition when adding filler to the fence.
Wipe the area around the hole in the vinyl fence with a damp rag to remove any dirt or debris.
As long as the rail is the right length it should fit.
Push the rail into the post holes until the rail hangs in place.
Get shopping advice from experts friends and the community.
Is there anything i could use to patch the hole or cover it.
Then paint the area to match the rest of the fence.
This will be needed only if the hole has more than 1 in diameter.
Using a medium grit sandpaper.
Need to know how to repair a hole in the horizontal member of my vinyl fence.
The hole is a little bigger than a golf ball.