How To Apply Bed Liner To Floor

Within 24 hours the bed liner is fully cured and able to handle whatever you might throw its way.

How to apply bed liner to floor.

Dip your roller brush into the coating. When choosing a bed liner paint read the specifications on the paint can for surfaces you can apply it to. Herculiner can be applied between 32 f and 95 f. Pick a bed liner paint that says it can be applied to wood or any clean dry surface.

I ve never done body work but i have painted pc cases spray bomb and this is the process i would use. After allowing 1 to 1 hours to dry apply a second coat to cover any open pores. It worked great and was pretty easy. Stock floor body drop tpi 383 w 0411 pcm conversion.

Curing begins when the herculiner is exposed to atmospheric moisture. Applying bed liner paint is an easy process that can be done in little time. Use mineral spirits or lacquer thinner to clean up any spills. Herculiner may be applied with a brush roller or spray gun.

Be aware that the. You also want to pick a bed liner paint that can be applied with a roller. In the video we are applying rust oleum professional truck bed liner to our 1984 dodge ram d150 pickup truck. Roll on the bed liner.

Let the bed dry for about 24 hours longer if the weather is cool. A spray gun the least. Work from the front of the bed toward the back overlapping the roller strokes. Remove the masking tape within 4 hours or so.

Some bed liner paints may specify that they are only for metal surfaces. 98 s 10 extended cab. A roller will provide the roughest final texture. Just be sure you only get the bottom part of the roller wet.

Your truck bed is ready for light use after 90 minutes of drying time. Allow the first coat to dry for 20 minutes and then follow with a second coat. Apply the second coat from the sides of the bed which may require a stepladder. After the second coat dries repeat for a third coat.

Before applying herculiner it is important that the surface to be coated is completely clean.